c***x
发帖数: 1169 | 1 3周前换了四个火花塞，昨天突然低速行驶时引擎发抖，有种“突突”的感觉，高速行
驶时不明显。
换回四个旧的火花塞后，引擎就好了，低速和高速行驶都自我感觉回复正常，但check
engine的灯还是亮的。读code说是火花塞有missing fire。这四个旧的火花塞之前都好
好的没有问题。
求大牛推荐解决之道：断开电池？我在网上看可以reset那个code，这个autozone可以
免费给做吗？
有包子的。 | c***x
发帖数: 1169 | | c***x
发帖数: 1169 | 3 kao。
看看放狗的结果吧。
FAQ: How do I reset the "Check Engine" Light?
After you've properly diagnosed and fixed the problem that triggered the OBD
trouble code, you can reset or clear the Check Engine / Service Engine Soon
light by one of two methods.
Note: The code (i.e. CEL / SES light) will usually go away after a certain
number of driving cycles, perhaps a few days. You can choose to wait it out
or follow one of these methods.
The cheap, easy, free method
Simply disconnect your battery, turn on the headlight switch for about five
to ten minutes, and re-connect the battery. This is pretty simple, but will
likely result in you losing your radio presets and perhaps some other small
things like that.
Using a scan tool
Most if not all scan tools have an option to clear or reset codes without
the use of any tools or touching the battery. Consult your tool's manual for
information on how to do it with your particular model. |
|
