a******e
发帖数: 331 | 1 大家如何做ON-CHIP INDUTOR
Doing RFID, 433.9 MHz, Q requirement for inductor quite high.
How to do on-chip inductor, what is your recommendation?
Any advice is appreciate. |
x***y
发帖数: 830 | 2
从design kit里头选个现成的,慢慢自己优化
【在 a******e 的大作中提到】
: 大家如何做ON-CHIP INDUTOR
: Doing RFID, 433.9 MHz, Q requirement for inductor quite high.
: How to do on-chip inductor, what is your recommendation?
: Any advice is appreciate.
|
m*******2
发帖数: 293 | |
a******e
发帖数: 331 | 4 0.13 Global Foundry or 0.13 IBM(this one better had top thick metal but much
more expensive)
Design kits inductors all targeted and measured at 2.5G, useless
Anyone using tools to estimate/design inductor such as Ansoft HFSS or any
tools from agilent??
【在 m*******2 的大作中提到】
: 什么工艺？
|
b*******h
发帖数: 2585 | 5 spiral metal lines?
【在 m*******2 的大作中提到】
: 什么工艺？
|
s*****o
发帖数: 22187 | 6 ADS momentum?
much
【在 a******e 的大作中提到】
: 0.13 Global Foundry or 0.13 IBM(this one better had top thick metal but much
: more expensive)
: Design kits inductors all targeted and measured at 2.5G, useless
: Anyone using tools to estimate/design inductor such as Ansoft HFSS or any
: tools from agilent??
|
j******s
发帖数: 17 | 7 这个inductor应该会ultra huge…………
【在 a******e 的大作中提到】
: 大家如何做ON-CHIP INDUTOR
: Doing RFID, 433.9 MHz, Q requirement for inductor quite high.
: How to do on-chip inductor, what is your recommendation?
: Any advice is appreciate.
|
a******e
发帖数: 331 | 8 Thanks for the remark.
If I put it off-chip, it will be much easier for inductor itself. But how to
consider the package parasitic and connection interface. Do I need to
extract all S parameters for packaging leads etc and how reliable is that?
【在 j******s 的大作中提到】
: 这个inductor应该会ultra huge…………
|
