o**n
发帖数: 1249 | 1 有一个atv 3，觉得没什么用，想代替现在用的dockstar做的server，看specs应该比
dockstar强一些。不过网上好像没有dockstar那么完善的装linux的教程，有个gentoo
的，挺麻烦的。大家有搞过的分享一下经验么？最好能装debian，比较熟悉一点。谢谢！ |
c****f
发帖数: 1102 | |
o**n
发帖数: 1249 | 3 装bootloader然后装linux，和原来的OS有关系么？还需要jailbreak么？
【在 c****f 的大作中提到】
: atv3 都没破解吧....
|
c****f
发帖数: 1102 | 4
没破解怎么装bootloader? 求高人指点
【在 o**n 的大作中提到】
: 装bootloader然后装linux，和原来的OS有关系么？还需要jailbreak么？
|
o**n
发帖数: 1249 | 5 哦，我不太懂这个，见笑了。
【在 c****f 的大作中提到】
:
: 没破解怎么装bootloader? 求高人指点
|
o**n
发帖数: 1249 | 6 我对这个一知半解，请教一下。下面的这个方法是仅限老的atv么？里面没有提
jailbreak的事情。
[QUOTE]
The AppleTV firmware boots by looking for a file called boot.efi on OSBoot.
Boot.efi loads a darwin mach kernel (called mach_kernel) and drivers (kext).
If it can't find boot.efi, it then looks for boot.efi on Recovery. Another
way is if the system is booted with the "Menu" and "-" keys on the Apple IR
remote held down, it checks for a FAT32 or HFS partition with a Partition
Type of {5265636F-7665-11AA-AA11-00306543ECAC}, first on a USB storage
device, then on the internal HDD. If such a partition is found, it's mounted
and a file called "boot.efi" is read from the root folder and executed.
We boot Linux by taking advantage of the recovery mode of the firmware. When
the AppleTV OS boots, it resets an internal boot attempt count. If the boot
attempt count goes to zero, the firmware will look over the USB bus for a
Mass Storage Device with a Recovery partition and attempt boot. You can also
force the USB probe by holding down the "menu" and "-" buttons on the IR
remote at powerup.
So to get Linux to boot, we create a proper Recovery partition with boot.efi
and a mach kernel that is actually a secondary Linux boot loader. The
firmware loads boot.efi which loads our "mach kernel" and a dummy kext, at
that point we have control and own the box.
[/QUOTE]
【在 c****f 的大作中提到】
:
: 没破解怎么装bootloader? 求高人指点
|
p***r
发帖数: 1098 | 7 这个说的是ATV 一代吧？
.
).
Another
IR
mounted
【在 o**n 的大作中提到】
: 我对这个一知半解，请教一下。下面的这个方法是仅限老的atv么？里面没有提
: jailbreak的事情。
: [QUOTE]
: The AppleTV firmware boots by looking for a file called boot.efi on OSBoot.
: Boot.efi loads a darwin mach kernel (called mach_kernel) and drivers (kext).
: If it can't find boot.efi, it then looks for boot.efi on Recovery. Another
: way is if the system is booted with the "Menu" and "-" keys on the Apple IR
: remote held down, it checks for a FAT32 or HFS partition with a Partition
: Type of {5265636F-7665-11AA-AA11-00306543ECAC}, first on a USB storage
: device, then on the internal HDD. If such a partition is found, it's mounted
|
j********2
发帖数: 4438 | 8 atv3没破解。推荐上rk3066芯片的那一票android电视棒吧 |
