m**********s
发帖数: 754 | 1 在没有dedicate的Front High Bi-Amp口的receiver上，要在front loud-speaker上Bi-
Amping的话，到底是用双线从同一个FL-FR出来好，是在音箱一端跳线好，还是接有些
receiver上的rear-surround好啊？
如果跳线的话是接高跳低，还是一边高一边低，或者都接低的？各有啥利弊？
多谢解惑。
/附：从亚马逊上随便抓了一个receiver的接线板图，可见后环绕和Bi-Amp在一套接线
柱上？ | m**********s
发帖数: 754 | | a*****8
发帖数: 294 | 3 Bi-amplifier connection
If you are not using surround back speakers or
front high speakers, you can connect the front
speakers to the SPEAKERS SURROUND
BACK/FRONT HIGH/BI-AMP/FRONT B
terminals using a bi-amplifier connection.
Connect the jacks on the Lo (or Hi) side of the
front speakers to the SPEAKERS FRONT A
terminals, and connect the jacks on the Hi (or
Lo) side of the front speakers to the
SPEAKERS SURROUND BACK/FRONT
HIGH/BI-AMP/FRONT B terminals.
After you have made the bi-amplifier
connection, set “SB Assign” to “BI-AMP” in
the Speaker Settings menu | m**********s
发帖数: 754 | 4 谢谢解答。小包子已发。
这个接法和高级些带front hi biamp输出的receiver比如何呢？换句话说，这种
surround back变front biamp输出在输出的频率和功率上都靠谱吗？
【在 a*****8 的大作中提到】
: Bi-amplifier connection
: If you are not using surround back speakers or
: front high speakers, you can connect the front
: speakers to the SPEAKERS SURROUND
: BACK/FRONT HIGH/BI-AMP/FRONT B
: terminals using a bi-amplifier connection.
: Connect the jacks on the Lo (or Hi) side of the
: front speakers to the SPEAKERS FRONT A
: terminals, and connect the jacks on the Hi (or
: Lo) side of the front speakers to the
| C********N
发帖数: 1263 | |
|
